Original NGK Sparkplugs 6 Heat Range Perfect for applications from stock...
High quality manufacturing and processing The latest designs Perfect...
Thread Size: M12 X 1.25 or M12 X 1.5 Open end for use with extended...
Part No. CAP-087 Price for one center cap JR3, JR11 (20"), JR18, JR21,...
High quality C.N.C machined aircraft aluminum Oil temperature, oil...
We have them for every Nissan Skyline! Price is for set, x6 coil packs...
Original Nissan Part OEM No.: 24079-0V000, 24079-24U10 15cm Wire...
Shift throw reduced by 40% Direct bolt-on installation, no modifications...
High Quality Racing K&N Oil Filter Fits all 1JZ, 2JZ, RB20, RB25,...
Set of 6 1000cc Toyota Supra 2JZ JZA80, Aristo 11-14mm top feed...
Set of 6 1200cc Toyota Supra 2JZ JZA80 11-14mm top feed conversionE85...
Set of 4 450cc injectors (MPFI) for 2012-2015 Subaru BRZ, Toyota 86, and...
Set of 6 750-1000cc Nissan 350z-370z, R35 GTR, Skyline NEO RB25DET,...
Set of 6 950cc side feed injectors for Nissan 300zx 90-96 and Skyline...
Set of 4 950cc injectors for Nissan G20/SR20 240SX/200SX/SR20DET/KA24DE...
Set of 4 270-1200cc Low Impedance Injectors for Nissan 240sx CA18DET...
Set of 6 Bosch 1500-2200cc Injectors for Nissan R35 GTR VR38, 350Z, R34...
No supplier
These NRG quick releases feature a new chunky baseplate in multi-fitment for Momo/Sparco/HKB/Nardi hubs and wheels For any kind of driving These spacers bring the wheel 60mm closer to the driver allowing a more comfortable driving position for taller drivers or most cars with bucket seats It's also removeable to offer easier access in and out of the car
This kit is for the following models: NIssan S13 S14 Nissan 200SX, R32, R33, R34 (Non HICAS) 87-90 Pulsar
This kit is for the following models: 90+ Nissan 200SX89-98 Nissan 240SX (will not work with Hicas) | S13 | S1490+ Nissan 300ZX (will not work with Hicas) SRK-142H might work as well ( please contact us before you purchase for this car)89-04 Nissan Skyline ( will not work with Hicas)88-97 Nissan Pickup93-06 Nissan Altima89-98 Nissan Maxima87-90 Nissan...
If you already have a Momo/Sparco boss and want to fit a Nardi or Personal steering wheel, you will need to either replace the boss or use one of these! Nardi/Personal PCD is 6x74mm with two bolts at the top and Momo/Sparco type is 6x70mm PCD with one bolt at the top