No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Top sellers
-
NGK Sparkplugs 6-8 Heat Range RB26 RB25
Original NGK Sparkplugs 6 Heat Range Perfect for applications from stock...
4,99€ -
-
Japan Racing JR3 18" 9-10.5J wheels
High quality manufacturing and processing The latest designs Perfect...
183,00€ -
Japan Racing Center Cap Universal JR3, JR11 (20"), JR18, JR21, JR22, JR23
Part No. CAP-087 Price for one center cap JR3, JR11 (20"), JR18, JR21,...
9,90€ -
Japan Racing Forged Steel Lug nuts
Thread Size: M12 X 1.25 or M12 X 1.5 Open end for use with extended...
49,00€ -
Skyline RB25 RB26 Benchmark Coil Pack Set
We have them for every Nissan Skyline! Price is for set, x6 coil packs...
245,00€ -
Nissan RB26 RB25 SR20 RB20 RB25 NEO Coil pack Plug
Original Nissan Part OEM No.: 24079-0V000, 24079-24U10 15cm Wire...
8,90€ -
Japan Racing JR11 18" wheels
High quality manufacturing and processing The latest designs Perfect...
184,00€ -
1JZ 2JZ RB26 RB25 RB20 K&N Racing Oil Filter
High Quality Racing K&N Oil Filter Fits all 1JZ, 2JZ, RB20, RB25,...
24,00€ -
Universal Thermostat Oil Cooler Kit AN10 13 to 30 Row
Universal fit for all JDM Cars High Quality Lightweight Aluminum with...
189,00€
Categories
- Engine
- Drivetrain
- Suspension
- Brakes
- Exterior
- Interior
- Wheels
New products
-
-
PRP Bottom Crank Cherry Hall Sensor
To be used on the CAM plate or any DIY projectInstructions
65,00€ -
-
PRP Nissan RB Double Head Drain Kit
This well-engineered piece of gear is specifically designed to maximize...
170,00€ -
Nissan R35 GTR VR38 Benchmark Coil Pack Set
We have them for every Nissan Skyline! Price is for set, x6 coil packs...
204,00€ -
-
RB R35 VR38 Coil Pack Harness Loom - (RB20 RB25 RB26)
RBLOOM1 R32 GTR - 6pin igniter delete big 3pin grey power RBLOOM2 RB25...
118,00€ -
PRP RB NEO R35 VR38 Coil Bracket Kit (RB25 NEO)
RBLOOM1 R32 GTR - 6pin igniter delete big 3pin grey power RBLOOM2 RB25...
320,00€
No supplier
New products
PRP Bottom Crank Cherry Hall Sensor
To be used on the CAM plate or any DIY projectInstructions
65,00€In StockPRP Top Black Cherry Hall Sensor
To be used on the CAM plate or any DIY projectInstructions
65,00€In StockPRP Nissan RB Double Head Drain Kit
This well-engineered piece of gear is specifically designed to maximize fluid flow out of the back of the Nissan RB cylinder head where it needs it most. Everyone has seen an aftermarket head drain, but this ticks all the boxes, this new PRP unit allows oil drainage to the left or the right or both, which works well for the dry-sump user.Instructions
170,00€In StockNissan R35 GTR VR38 Benchmark Coil Pack Set
We have them for every Nissan Skyline! Price is for set, x6 coil packs Tested with more than 700 hp Favorite Coils packs in all UK Skyline forums 1 year manufacturer's warranty
204,00€In StockRB R35 VR38 Coil Pack Harness Loom - (RB20...
RBLOOM1 R32 GTR - 6pin igniter delete big 3pin grey power RBLOOM2 RB25 - 7pin igniter delete small 2pin grey power RBLOOM3 R33 GTR - 6pin igniter delete small 2pin black power RBLOOM4 R34 GTR - 8pin harness connector RBLOOM5 RB25 NEO - 8pin harness connector RBLOOM6 RB UNIVERSAL - dt8 deutsch connector end OEM plugs, braid covered, dual heat shrunk...
118,00€In StockPRP RB NEO R35 VR38 Coil Bracket Kit (RB25...
RBLOOM1 R32 GTR - 6pin igniter delete big 3pin grey power RBLOOM2 RB25 - 7pin igniter delete small 2pin grey power RBLOOM3 R33 GTR - 6pin igniter delete small 2pin black power RBLOOM4 R34 GTR - 8pin harness connector RBLOOM6 RB UNIVERSAL - dt8 deutsch connector end Benchmark or OEM R35 GTR Coilpacks (6 Set) Loom Selection Instructions Install...
320,00€In StockPRP RB R35 VR38 Coil Bracket Kit (RB20,...
RBLOOM1 R32 GTR - 6pin igniter delete big 3pin grey power RBLOOM2 RB25 - 7pin igniter delete small 2pin grey power RBLOOM3 R33 GTR - 6pin igniter delete small 2pin black power RBLOOM4 R34 GTR - 8pin harness connector RBLOOM6 RB UNIVERSAL - dt8 deutsch connector end Benchmark or OEM R35 GTR Coilpacks (6 Set) Loom Selection Instructions Install...
320,00€In StockPRP Trigger Kit Backing Plate
Specially designed to work with PRP twin can trigger kits, usually used when running the factory timing covers. Will block the hole left when using PRP cam trigger kits if you wish to run one. The best looking trigger kit on the market will still look fantastic with this little anodized CNC 6061 accessory to compliment your trigger kit
30,00€In StockPRP RB30 Single Cam CAS Bracket
To run mechanical fuel pump kit or trigger Kit Standard CAS or your existing aftermarket trigger This piece of CNC machined billet alloy is a nice addition to your expensive engine bay Benefit of being able to adjust your cam gear without the removal of the crank angle Works with all known aftermarket trigger kits and bolt-on upgrades as well as any OEM...
179,00€In StockPRP Nissan RB Cam Covers
SPECIAL ORDER Custom Billet Rocker covers, a nice clean tidy look for your race or street car Few options with breathers being -10AN and 1/2″ NPT Any colour including silver, black, grey, blue, Gold, and of course purple For Dry or Wet sump
770,00€In StockPRP Billet Sensor Manifold
Billet sensor manifold to fit 1/8 10NPT sensors Coolant, Fuel, Oil, Manifold, & Boost engraved onto the face The sensor manifold is fully designed and manufactured at our facility here in Australia using the latest Japanese CNC technology to deliver you Fabtech quality
75,89€In StockPRP Nissan S & R Chassis Subframe Spacers
Subframe Spacers to lower the subframe by 9mm 4 needed for S-Chassis 8 needed for R-Chassis Easy to install drop your cross member down a little bit slipped them in and retighten bolts Can reuse same bolts
17,50€In StockPRP RB Bottom Bracket for Cherry Hall Sensor
Bottom Bracket Bolts * 99% people order Black because it is hidden and can't be seen. If you order a different color than black you will have to wait.
140,00€In StockPRP RB Exhaust Side Solid Engine Mount
Solid engine mount to be used on the exhaust side Only comes in Black now
54,00€In StockPRP RB Twin Cam Single CAS Bracket
To run mechanical fuel pump kit and separate trigger Kit Standard CAS or your existing aftermarket trigger This piece of CNC machined billet alloy is a nice addition to your expensive engine bay Benefit of being able to adjust your cam gear without the removal of the crank angle Works with all known aftermarket trigger kits and bolt-on upgrades as well as...
161,00€In StockPRP RB Twin CAM Double CAS Bracket
To run mechanical fuel pump kit and separate trigger Kit Standard CAS or your existing aftermarket trigger This piece of CNC machined billet alloy is a nice addition to your expensive engine bay Benefit of being able to adjust your cam gear without the removal of the crank angle Works with all known aftermarket trigger kits and bolt-on upgrades as well as...
278,00€In StockPRP RB Billet Block Brace with Integrated...
Aimed at 2000hp plus applications, although no issue running this on stock car Excellent thermal expansion properties matched to your OEM block Easier to fit than typical standard braces Brace comes with bolt kit in any of the 4WD/ 2WD configurations Block face is O-ring aided for ease of sealing Brace is blackened (surface treated) for corrosion...
1 578,00€In StockPRP RD28 / RB30 4WD Wet Sump Block Brace
RD28 / RB30 4WD Wet Sump Block Brace (PREC30W-4WD) Hi-grade aircraft quality billet aluminum With the kit provided and after a few modifications, a standard GTR type sump will bolt straight on. The Platinum Brace overlays and supports the factory main cap cradleInstructions
1 168,00€In StockPRP RB25 & RB26 2WD or 4WD Billet Block Brace
RB26 or OEM 4WD RB Block - PREC26P-4WD RB26 removed and welded the OEM RB26 diff housing off the sump to make it 2WD - PREC26P-2WD RB26 with RB25 2WD Sump Dry Sump Setup - PREC30D-2WD RB25 with OEM RB25 2WD Wet Sump Setup - PREC30D-2WD RB25 with OEM RB26 4WD Sump cut to be used as a 2WD Wet Sump - PREC30W-4WD RB25 with OEM RB26 2WD Dry Sump -...
959,00€In StockPRP RB Nissan Billet Alternator Bracket...
PRP LS1 alternator conversion kit The LS1 alternator produces 140 A and is a cheap viable upgrade for the RB Engine Good looking simple solution that allows your alternator to come in and hug the block as much as possible Comes with billet alternator bracket, adjusting hardware, 20% reduction alternator pulley to suit RB 4 rib belts Instructions
230,00€In Stock
